FURUNO

GPS Receiver Chips & Modules

GPS Receiver Chip eRideOPUS 5 (ePV5800B)

GPS Receiver Chip eRideOPUS 5 (ePV5800B)

Ultra high-sensitivity, single-die GPS/A-GPS receiver chip

eRideOPUS 5 (ePV5800B) is a high-sensitivity GPS/AGPS receiver System-in-a-Package (SiP) that combines single-die receiver. It delivers fast, accurate positioning data in challenging locations such as indoor environments and deep urban canyons.

  • for Automotive/Industrial
  • for Consumer
Ultra-high Sensitivity: -162 dBm acquisition sensitivity ensures position fix availability indoors, outdoors and in urban canyons
Fast: <1 sec TTFF ensures user satisfaction
Easy Integration and Miniature Size: Optimized RF and Digital design ensures GPS performance while on-chip LNA minimizes BOM
Supports WAAS:2 Channel capable SBAS (EGNOS, WAAS and MSAS)
Dual GPS/AGPS Modes:Complete Autonomous GPS mode with (and/or) Simple Assisted GPS mode for Plug and Play solutions. Supports eRide Symphony Assisted-GPS Server Aiding including 7-day Long Term Compact Satellite Models
Advanced Features:PPS output and Dead Reckoning for uninterrupted positioning
Configurable up to 5Hz

Receiving signal

 L1(1575.42MHz)

Tracking Code

 C/A code

Number of Channel

 32ch

Tracking satellites

 12ch

SBAS

 2channel capable SBAS

Maximum Update Rate

 5Hz

Sensitivity

 Tracking: -162 dBm
Acquisition (Hot Start): -161.5 dBm
Acquisition (Warm Start): -147.5 dBm
Acquisition (Cold Start): -146.5 dBm

Position Accuracy

 Outdoors: 1.7 m CEP
Indoors: 19 m CEP

TTFF average

 Hot Start (Outdoors) : <1 sec Typ
Hot Start (Indoors) : 7.5 sec Typ
Warm Start: 30 sec Typ @ -130 dBm
Cold Start: 33 sec Typ @ -130 dBm

Supply Voltage

 1.8V (optional 1.0V for core)

Power Consumption

 Track Mode, Indoors: 46 mW
Search/Acquisition Mode: 58 mW

Operating Temperature

 -40°C to +85°C

Package

 141-ball TFBGA: 9.0mm x 9.0mm with 0.65mm ball pitch

Protocols

 NMEA 0183
eRide Serial Interface Protocol (eSIP)

Processor

 Embedded ARM9® with cache On-chip 384KB ROM and 160KB RAM

Serial Port

 2 UART’s, SPI, I2C, 9 GPIOs

Digital I/O

 1.8 Volt CMOS Levels

eRideOPUS 5 Evaluation Kit

eRideOPUS 5 Evaluation Kit
eRideOPUS 5 Evaluation Kit is available to evaluate the performance of eRideOPUS 5 - the high-sensitivity GPS/AGPS receiver chip -.
The Evaluation Kit can supply power and communicate with USB interface.
FEATURES
  • ・5VDC Power supply through USB bus power
  • ・Serial communication through RS232C
  • ・1PPS output　from the SMA connectors.
  • ・SMA antenna connection
  • ・Outer size is (w) 100mm x (D) 80mm x (H) 22mm
  • ・Weight is about 140g.
  • ・Accessories are USB cable, GPS Antenna and CD ROM containing the Communication Software, the USB driver and the documentations.

Specifications subject to change without notice.

Related Products

Page Top