GPS/GNSS Antennas

GPS Antenna Model AU-15

For Automotive/Industrial

Antenna for GPS signal reception

This antenna is designed especially for Automotive and industrial GPS receiver.


  • Antenna for GPS signal reception (L1 band)

    For timing applications and with high noise resistance, Multi-GNSS antenna AU-217 offers the best solution.
    Here's more on  Multi-GNSS antenna AU-217
  • The antenna consists of the antenna for receiving GPS signal and the preamplifier for signal amplification.

  • Power supply for preamplifier operation is supplied by overlapping the signal line.

  • The antenna connector type consists of BNC, GT-5 and SMB.

  • The antenna has an internal magnet so that it can be fixed on a metallic surface.

  • Furuno Multi-GNSS/GPS Antenna Lineup

    Product Name Applications Supported Satellite Constellations Note
    AU-217 For Fixed Position
    Ideal for use in location with intense electric field thanks to built-in noise filter.
    Highly noise resistant and highly environmental resistant equivalent to IP67.
    GPA-014 - Ideal for use in location with frequent/heavy snowfall.
    AU-18 For Mobile Available with a choice of antenna connector type.
    AU-15 -



Input Frequency1575.42MHz±1.023MHz
PolarizationR. H. C. P. (Right Hand Circular Polarization)
Antenna Gain>= 2.0dBi (at 90° elev. angle)
>= -6.0dBi (at 10° elev. angle)
Output Impedance50Ω
Total Gain20±6dBi (AU-15-5B, AU-15-5G, AU-15-5S)
24±6dBi (AU-15-1.0B)
Pre. Amp Noise Figure<= 2.3dB
VSWR<= 2.0
Supply Voltage5.0 ±0.5VDC
Power Consumption<= 30mA
Operating Temperature-30°C to +85°C
Storage Temperature-40°C to +100°C
Operating Relative Humidity<=95%RH
Series Lineup (Connector, Cable)AU-15-5B (BNC, 1.5DS×5m)
AU-15-1.0B (BNC, 1.5DS×1m)
AU-15-5G (GT-5, 1.5DS×5m)
AU-15-5S (SMB,1.5DS×5m)



Locate a Distributor Contact a local distributor for further details.

* Specifications subject to change without notice.

To Page Top